(1)The controller buttons "MOTOR+","MOTOR-" can not work for the static laser lights.
(2)Plug the laser in power and press the "ON/OFF" button within 5 seconds to synchronize the remote with the light.
(3) Timer Setting: Built-in timer runs for 1,2, 3, 4, 5, or 6 hours,can adjust the flicker frequency, and closes after the time you set.
(4)Control the Icicle laser light within 43 feet.
1. Laser light: Red 650nm, green 532nm
2. Effect: All over the sky (static)
3. Input & Output: AC 100V-240V/50-60Hz; DC 12V 1000mA
4. Modes: Steady on red & green / steady on red / steady on green / flicker flash on red & green.
5. Operating temperature: -26~32 (, low temperature preheating 2-15 minutes)
6. Laser light waterproof grade: IP65
7. Adapter waterproof grade: IP44
1. Please remove the insulating film at the bottom when using the remote
2. Only use supplied power adapter connected to a properly grounded outdoor outlet. Do not use with other dimmers or remote timers.
3. If the green laser lights work intermittently, it will need a 15-20 minutes warm-up. When the temperature is below 14° F, the green laser model will need to be heated for about 15-20 minutes to work normally. Green laser is affected by temperature and humidity.
4. Please avoid direct eye exposure.
5. This product is FDA Certified, FDA Certification serial No.1511210-000
Buy with confidence. If have any question, please contact us! We will response and solve within 24 hours.